|Click to enlarge||*NO LONGER AVAILABLE / DISCONTINUED* |
Grab Those Numbers Right Off The Air!
- Built-in RJ11 phone jack for easy hook-up and line monitoring
- Super fast-capture numbers off the radio, repeater, phone line, etc.
- Big, bold 8-digit display with automatic insertion of dashes between number groups
Dialed phone numbers, repeater codes, control codes, anywhere touch-tones are used, your TG2 will decode and store any DTMF tone it hears. A simple hook-up to any radio speaker or phone line is all that is required. Since the TG2 uses a central office quality decoder and a FLASH microprocessor, it will decode digits at virtually any speed! The FLASH storage capability of the microprocessor means you can store 640-digit numbers for 10 years - even with the power turned off!
The bright 8-digit LED display lets you scroll through the stored numbers at your leisure. To make it easy to pick out numbers or codes, a dash is inserted between any group or set of numbers that were decoded more than 3 seconds apart. Added features from its TG1 predecessor include an onboard RJ11 phone jack for easier phone line interfacing and an output latch jack offering an external trigger source when a user specified number (1 to 60 digits!) matches the monitored input! The TG2 runs on any 8 to 15 volt DC power source and is both regulated and crystal controlled for the ultimate in stability. Includes the matching professional case set shown, measuring 5”W x 1½”H x 5¼”D.
User Manual in PDF