|Click to enlarge||*Currently unavailable.* |
*We don't know when or if this item will be back in stock.*
- Jumper configurable
- Active high, active low, or both
- Works with your existing projects and applications
The BD416 is a 4 bit binary to 16 line decoder with active low outputs. Use it to interface to any 5 volt 4 bit binary output logic signal to provide a one of 16 line output signal. The output may be configured to either directly follow the binary input or to latch when the valid data signal input is applied. The valid data signal may be configured to be either active high or low. In the latched output configuration the BD416 may be configured to initialize in either a set, low output, or reset, high output, state. Configuration is accomplished using simple jumper block settings
The BD416 may also be used with the RXD433A and RXD916 wireless receiver modules to provide a 1 of 16 output from the binary output. Each of the outputs is an active low, open collector signal able to drive an LED indicator or you can use our new RI1, or OM2 interface circuits and drive relays, or other high power loads. The BD416 operates on 5VDC and is 2.5" x 3.75" with mounting holes on a 2" x 3" grid.
User Manual in PDF (BD416.pdf)