|Click to enlarge|| |
|Availability||Stock: in stock|
BCD switch, HEX (0-15), pushwheel, pen-push type. Manufactured by Plaimae Corporation.
Has additional 5 pin connector (standard 0.1" centers).
Thumbwheel & Pushwheel Switches
1. Wide range of
pushwheel & thumbwheel
mount & rear mount
middle enhanced, middle, small
BCD, BCD complement, decimal, repeating, double pole decimal
terminal, PCB with PC pin, PCB with row pin
blanks, endcaps, connectors
2. Snap-In, easy
connecting & easy mounting without rods and nuts.
3. Show out its
contact setting at all time.
4. The movement of the
wheel can be limited by stops.
Blank, Endcap, Wheel, Push button: Thermoplastic / Polyacetal, UL94HB.
contact: Hard gold flash over nickel plated on phosphor bronze.
circuit board: Hard gold flash over nickel plated on 0.79mm thickness epoxy
Board: Epoxy laminate CEM-3.
a. Operating voltage: 50V AC / 28V DC maximum
b. Switching current: 100 mA maximum
c. Carrying current: 1A maximum (500 mA max. for small size series)
resistance: (Per Method 307 of MIL-STD-202) 200 £[ maximum
resistance: (Per Method 302 of MIL-STD-202)
a. Between common terminal and any output : 10
b. Between each output and non-current-carrying part : 1000
4. Dielectric strength:
(Per Method 301 of MIL-STD-202)
a. Between common terminal and any output: 800V AC 1 minute
b. Between each output and non-current-carrying part: 1000V AC 1 minute
temperature: -20¢XC to +70¢XC
6. Operating force: 350
a. Mechanical: 200,000 detent operations
b. Electrical: 100,000 detent operations