|Click to enlarge||*Currently unavailable.* |
*We don't know when or if this item will be back in stock.*
- Drive loads up to 150mA at 40VDC
- Active high, active low, or both
- Works with your existing projects and applications
The BE164 is a 16 to 4 line or 8 to 3 line binary output encoder. The encoded output may be configured to provide an active low binary signal that continuously follows the input or is active only when data valid signal is activated. All inputs are active low and the output is configurable to be either active high or active low. An active high data valid signal is provided at the output. Input and output connections are via three 10 pin 0.1" DIP connectors.
The BE164 may be used with our TXE433 and TXE916 Wireless transmitters to provide encoded data inputs. You may also use it to provide a binary encoded signal to any device such as a computer that uses a 5 volt binary logic level. It is also designed to operate with our Digital Voice Messaging System, DVMS. A simple direct connection to the DVMS provides direct access to any of the up to 8 stored voice messages. All configuration is done using simple on-board jumper blocks. Runs on 5VDC and is 2.5" x 2.5".
User Manual in PDF (BE164.pdf)